CS6200 Information Retrieval
Homework2: Indexing, Term Positions

Objective

Implement your own index to take the place of elasticsearch in the HW1 code, and index the document collection used for HW1. Your index should be able to handle large numbers of documents and terms without using excessive memory or disk I/O.

This involves writing two programs:

A tokenizer and indexer
An updated version of your HW1 ranker which uses your inverted index

You have some flexibility in the choice of algorithms and file formats for this assignment. You will be asked to explain and justify your approach, but any reasonable approach will work.

Step One: Tokenizing

The first step of indexing is tokenizing documents from the collection. That is, given a raw document you need to produce a sequence of tokens. For the purposes of this assignment, a token is a contiguous sequence of characters which matches a regular expression (of your choice) – that is, any number of letters and numbers, possibly separated by single periods in the middle. For instance, bob and 376 and 98.6 and 192.160.0.1 are all tokens. 123,456 and aunt's are not tokens (each of these examples is two tokens — why?). All alphabetic characters should be converted to lowercase during tokenization, so bob and Bob and BOB are all tokenized into bob.

You should assign a unique integer ID to each term and document in the collection. For instance, you might want to use a token’s hash code as its ID. However you decide to assign IDs, you will need to be able to convert tokens into term IDs and covert doc IDs into document names in order to run queries. This will likely require you to store the maps from term to term_id and from document to doc_id in your inverted index. One way to think about the tokenization process is as a conversion from a document to a sequence of (term_id, doc_id, position) tuples which need to be stored in your inverted index.

For instance, given a document with doc_id 20:

The car was in the car wash.

the tokenizer might produce the tuples:

(1, 20, 1), (2, 20, 2), (3, 20, 3), (4, 20, 4), (1, 20, 5), (2, 20, 6), (5, 20, 7)

with the term ID map:

1: the
2: car
3: was
4: in
5: wash

Step Two: Indexing

The next step is to record each document’s tokens in an inverted index. The inverted list for a term must contain the following information:

The DF and CF (aka TTF) of the term.
A list of IDs of the documents which contain the term, along with the TF of the term within that document and a list of positions within the document where the term occurs. (The first term in a document has position 1, the second term has position 2, etc.)

You should also store the following information.

The total number of distinct terms (the vocabulary size) and the total number of tokens (total CF) in the document collection.
The map between terms and their IDs, if required by your design.
The map between document names and their IDs, if required by your design.

All inverted lists/files written on the hard drive have to be sorted on DocBlocks by the TF count. This will facilitate merging, in particular with mergesort.

Stemming and Stopping

Experiment with the affects of stemming and stop word removal on query performance. To do so, create two separate indexes:

An index where tokens are not stemmed before indexing, and stopwords are removed
An index where tokens are stemmed and stop words are removed

You should use this list of stop words, obtained from NLTK.

You may use any standard stemming library. For instance, the python stemming package and the Java Weka package contain stemmer implementations.

Performance Requirements

Your indexing algorithm should meet the following performance requirements. You will be asked during your demo to explain how you met them.

If you keep partial inverted lists in memory during indexing, you have to limit by number of documents (not store more than 1,000 postings per term in memory at a time).
Your final inverted index should be stored in a single (or few) file(s), no more than 20. The total size must be at most that of the size of the unindexed document collection, around 160-180MB without stopwords.
You should be able to access the inverted list for an arbitrary term in time at most logarithmic in the vocabulary size, regardless of where that term’s information is stored in the index. You should not need to find an inverted list by scanning through the entire index.
Extra Credit Option: You are permitted to write multiple files during the indexing process, but not more than about 1,000 files total. For instance, you may not store the inverted list for each term in a separate file.

Step Three: Searching

Update your solution to HW1 to use your index instead of elasticsearch. Compare your results to those you obtained in HW1. Are they different? If so, why? You dont have to run all 5 models; one VSM, one LM, and BM25 will suffice.

Proximity Search

Add one retrieval model, with scoring based on proximity on query terms in the document. You can use the ideas presented in slides, or skipgrams minimum span, or other ngram matching ideas.

Some Hints

There are many ways to write an indexing algorithm. We have intentionally not specified a particular algorithm or file format.

The primary challenge is to produce a single index file which uses a variable number of bytes for each term (because their inverted lists have different lengths), without any prior knowledge about how long each list will need to be. Here are a few reasonable approaches you might consider.

Option 1- Required: Merging

Create partial inverted lists for all terms in a single pass through the collection. As each partial list is filled, append it to the end of a single large index file. When all documents have been processed, run through the file a term at a time and merge the partial lists for each term. This second step can be greatly accelerated if you keep a list of the positions of all the partial lists for each term in some secondary data structure or file.

Extra Credit Option: Discontiguous Postings

Lay out your index file as a series of fixed-length records of, say, 4096 bytes each. Each record will contain a portion of the inverted list for a term. A record will consist of a header followed by a series of inverted list entries. The header will specify the term_id, the number of inverted list entries used in the record, and the file offset of the next record for the term. Records are written to the file in a single pass through the document collection, and the records for a given term are not necessarily adjacent within the index.

Extra Credit Option: Multiple passes

Make multiple passes through the document collection. In each pass, you create the inverted lists for the next 1,000 terms, each in its own file. At the end of each pass, you concatenate the new inverted lists onto the main index file (easy to concatenate the inverted files, but have to manage the catalog/offsets files)

Extra Credit

These extra problems are provided for students who wish to dig deeper into this project. Extra credit is meant to be significantly harder and more open-ended than the standard problems. We strongly recommend completing all of the above before attempting any of these problems.

Points will be awarded based on the difficulty of the solution you attempt and how far you get. You will receive no credit unless your solution is “at least half right,” as determined by the graders.

EC1(undergrad 4200); Required for MS students CS6200: Index Compression

Store the index in some compressed format and decompress it as needed when accessing it. For the sake of this assignment, you may not use a library for compression or decompression. For instance, it is not sufficient to run inverted lists through a gzip/gunzip routine in a library.

EC2: Multiple Fields

Provide the ability to index multiple document fields. Index the contents of the HEAD fields for a document (if any) in addition to the TEXT fields. Update your retrieval models to query the HEAD fields as well as the TEXT fields, weighting HEAD matches higher than TEXT matches. Does this improve retrieval performance? Why?

EC3: Query Optimization

Implement and compare multiple query processing algorithms (e.g., variations of doc-at-a-time and term-at-a-time matching) to achieve the best possible query performance. Include at least one inexact query processing method. How much can you improve query speed without overly sacrificing result quality?

Rubric

20 points: The correct tokens are produced
30 points: The correct inverted lists are produced
20 points: You meet the performance requirements
20 points: Your retrieval models perform as expected on your index
10 points: The proximity model perform as expected on your index

CS6200 Information Retrieval Homework2: Indexing, Term Positions